Introduction
Gun Overview
The electrostatic gun includes the following controls (see FIG. 1.).
•FLUID adjustment valve. Adjusts fluid rod travel. Use only in low flow conditions, to reduce wear.
•Fan AIR adjustment valve. Adjusts fan size and shape.
•Atomizing air RESTRICTOR valve. Restricts atomizing air flow. Replace with plug (included) if desired.
•ES ON/OFF valve. Turns electrostatics ON (I) or OFF (0).
•ES INDICATOR (standard gun only). Green when ES is ON (I).
•Voltage/current DISPLAY (smart models only). Shows voltage (V) and current (A). Green=spray, yellow/red=see Electrical Troubleshooting, page 39.
•ES HI/LO switch (smart models only). Sets volt- age to HI or LO (factory settings).
ES INDICATOR
ES ON/OFF
I ES O
RESTRICTOR
ti1266a
Standard Model
•LO VOLTAGE adjustment (smart models only). Remove plug to adjust to four settings. Page 21.
DISPLAY
LO VOLTAGE
| ES HI/LO | 0 KV | 100% |
|
| μα |
|
|
| HI |
|
| LO | ES |
|
| ES ON/OFF |
|
|
AIR | I | ES | O |
|
| AIR | |
|
|
|
RESTRICTOR
FLUID | FLUID |
| |
| ti1253a |
| Smart Model |
TRIGGER
AIR CAP
ELECTRODE
AIR INLET
FLUID TUBE
TI1681A
Fig. 1. Gun Overview
8 | 309293K |
