Grandstream Networks DP710 manual Completing Calls, Answering Calls, A. Dial, B. Redial

If you want to register ahandset to a new base, it has to be first de-registered from the existing base by selecting "desubscribe handset " option under the Handsets tab on the web GUI and then repeat the above steps.

COMPLETING CALLS

There are three ways to complete a call:

A. Dial

1. Press .

3.Dial the number you want once you hear the dial tone.

4.The number appears on the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to dial the number directly (Use # as dial key” must be configured in web configuration).

5. To finish the call, press or place the handset in the base unit or the charger unit.

B. Redial

1.Press .

2.The number you have most recently called appears in first place in the display.

3.	Use	or	to search for the number you need.
4.	Press		.

5.The number appearson the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to dial the number directly (Use # as dial key” must be configured in web configuration).

6.	To finish the call, press		or replace the handset in the base unit or the charger unit.
C.Using the Phonebook
1.	Press	.
2.	The first number in the phonebook appears on the display.
3.	Press or	to browse the phonebook.
4.	Press .

5.The number appearson the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to dial the number directly (Use # as dial key” must be configured in web configuration).

6. To finish the call, press or replace the handset in the base unit or the handset charger unit.

ANSWERING CALLS

The handset starts ringing during an incoming call; you have the following options to answer:

a. Press to pick up the call.

Firmware version 1.0.0.23 DP715/DP710 User Manual Page 29 of 52