Grandstream Networks DP710 manual Status Page

Allow DHCP server to	Default No. Let the DHCP server handle the Time Zone
set Time Zone
Language	Languages supported with voice prompt and web interface, except Spanish that it is only
	in IVR.
Reset Type	• Full Reset: This will make a full reset
	• ISP Data: This will reset only the basic settings, like IP mode, PPPoE and Web port
	• VOIP Data: This will reset only the data related with a service provider like SIP server,
	sip user ID, provisioning and others.

In addition to the Basic Settings configuration page, end users also have access to the Device Status page.

					Table 12:STATUS PAGE
	MAC Address	The device ID, in HEX format. This is very important ID for ISP troubleshooting. The Mac
		address will appear in this place. The MAC address will be used for provisioning and can
		be found on the label coming with original box and on the label located on the bottom
		panel of the device.
	RFPI Address
		Radio Fixed Part Identity; indicate the unique identification number of the DP715 base
		station.
	IP Address	This field shows the IP address of the DP715.
	Product Model	This field contains the product model info (“DP715”).
	Hardware Version
		This field shows the hardware revision of the unit and the part number.
	Software Version	Program: This is the main software release. This number is always used for firmware
		upgrade. Current release is 1.0.0.1 Boot and Loader are seldom changed.
		Bootloader:current version is 1.0.0.1.
		Core: current version 1.0.0.0
		Base: current version is 1.0.0.0
	Software Status	Running		Mem: 3980, indicate if the software is running and display the memory usage.
	System Up Time	Shows system up time since the last reboot.
	PPPoE Link Status	Indicates whether the PPPoE connection is up if the DP715 is connected to DSL modem.
	NAT	This filed indicates the type of NAT connection used by the DP715.
	Base Status	Displays relevant information regarding the Handset subscription status.
					Handset	Subscribe	IPUI	TPUI
					Handset 1	Yes	015a0178e4	000001
		• Handset 1 is subscribed with the DP715 base station.
		•	IPUI (“International Portable User Identity “): is the identifier of each Handset registered
			to the base.
		•	TPUI (“Temporary Portable User Identity”): Allocated to the Handset automatically by
			the DP715 base.
Firmware version 1.0.0.23					DP715/DP710 User Manual				Page 37 of 52