Grandstream Networks DP710 manual 10/100Mbps RJ-45 port toconnect to the network

	Table 2: DEFINITIONS OF THE DP715 CONNECTORS
DC 6V	Power adapter connection.
NETWORK PORT	10/100Mbps RJ-45 port toconnect to the network.
(RJ-45)
RESET	Factory Reset button: Press for 7 seconds to reset factory default settings.

	Table 3: BASIC DEFINITIONS OF THE DP715 LEDS PATTERN
LEDs
POWER LED	Indicates Power. Remains green when power is connected, and orange when handset is
	connected for charging.
NETWORK	Indicates Access to the Network. Remains ON while there is Access to the Network
REGISTERED	Indicates if the SIP accounts are registered
CALL	Indicates status of active calls.

Table 4: ADVANCED DEFINITIONS OF THE DP715 LEDS PATTERN

Pattern	Condition	LED	LED Behavior
Number
LED-01	Device has normal power	POWER	GREEN ON
LED-02	Handset is placed on base with battery to charge	POWER	ORANGE ON
LED-03	Power Error: Power is removed from the device	POWER	OFF
LED-04	Power supply with improper voltage is plugged in	POWER	Blink ( 0.5s on/ 0.5s off )
LED-05	Device has normal LAN connection and has obtained an	NETWORK	ON
	IP address
LED-06	Link Down	NETWORK	Blink (1s on/ 1s off).
	Note : This is the default state while the device is booting.
LED-07	Link Up but DHCP error	NETWORK	Blink ( 0.25s on/ 0.25s
			off )
LED-08	Link Up but PPPoE error	NETWORK	Blink ( 0.5s on/ 0.5s off )
LED-09	All configured SIP accounts are registered	REGISTERED	ON
LED-10	SIP accounts are in the process of registering	REGISTERED	Blink ( 1s on/ 1s off )
LED-11	Device is booting, application has not started.	REGISTERED	OFF
LED-12	No account is configured on DP715	REGISTERED	OFF
LED-13	Registration Error - ANY SIP account experiences	REGISTERED	Blink ( 0.5s on/ 0.5s off -
	registration failure.		05s on/ 2s off )
LED-14	Call is active. Any DECT handset is in an active call with	CALL	Blink ( 0.5s on/ 0.5s off )
	an external line.
LED-15	No active call.	CALL	OFF
LED-16	DECT Error		5 sequence of Blink
		CALL	(0.25s on/0.25s off) + 3s
			off
LED-17	VMWI		Blink (0.25s on/ 0.25s off -
		CALL	0.25s on/ 0.25s off - 0.25s
			on/ 0.75s off)
LED-18	Boot up	ALL	GREEN ON
LED-19	Factory reset	ALL	GREEN ( 0.25s on/0.25s
			off – 0.25s on/0.75s off )

Firmware version 1.0.0.23 DP715/DP710 User Manual Page 10 of 52