Grandstream Networks DP710 manual 10/100Mbps RJ-45 port to connect to the network

	Table 2: DEFINITIONS OF THE DP715 CONNECTORS
DC 6V	Power adapter connection.
NETWORK PORT	10/100Mbps RJ-45 port to connect to the network.
(RJ-45)
RESET	Factory Reset button: Press for 7 seconds to reset factory default settings.

	Table 3: BASIC DEFINITIONS OF THE DP715 LEDS PATTERN
LEDs
POWER LED	Indicates Power. Remains ON when power is connected
NETWORK	Indicates Access to the Network. Remains ON while there is Access to the Network
REGISTERED	Indicates if the SIP accounts are registered
CALL	Indicates status of active calls.

Table 4: ADVANCED DEFINITIONS OF THE DP715 LEDS PATTERN

Pattern	Condition	LED	LED Behavior
Number
LED-01	Device has normal power	POWER	ON
LED-02	Power Error: Power is removed from the device or power	POWER	OFF
	supply with improper voltage is plugged in
LED-03	Device has normal LAN connection and has obtained an	NETWORK	ON
	IP address
LED-04	Link Down	NETWORK	Blink (1s on/ 1s off).
	Note : This is the default state while the device is booting.
LED-05	Link Up but no IP Address	NETWORK	Blink ( 0.25s on/ 0.25s
			off )
LED-06	All configured SIP accounts are registered	REGISTERED	ON
LED-07	SIP accounts are in the process of registering	REGISTERED	Blink ( 1s on/ 1s off )
LED-08	Device is booting, application has not started.	REGISTERED	Blink ( 0.25s on/ 0.25s
			off )
LED-09	Registration Error - ANY SIP account experiences	REGISTERED	0.25sec ON/ 0.25sec OFF
	registration failure.
LED-10	Call is active. Any DECT handset is in an active call with	CALL	ON
	an external line.
LED-11	No active call.	CALL	OFF

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 10 of 52