| Via TFTP Server |
| This is the IP address of the configured TFTP server. If selected and it is |
|
|
|
| ||
|
|
| blank, the DP715 retrieves the new configuration file or new code image from the |
|
|
|
| specified TFTP server at boot time. After 5 attempts, the system will timeout and will start |
|
|
|
| the boot process using the existing code image in the Flash memory. If a TFTP server is |
|
|
|
| configured and a new code image is retrieved, the new downloaded image is saved into |
|
|
|
| the Flash memory. |
|
|
|
| Note: Please do NOT interrupt the TFTP upgrade process (especially the power supply) |
|
|
|
| as this will damage the device. Depending on the local network, this process can take up |
|
|
|
| to 15 or 20 minutes. |
|
|
|
|
|
|
|
|
|
|
|
| Via HTTP / HTTPS |
| The URL for the HTTP/HTTPS server used for firmware upgrade and configuration via |
|
| Server |
| HTTP. |
|
|
|
| For example, http://provisioning.mycompany.com:6688/Grandstream/1.0.0.67“:6688” is |
|
|
|
| the specific TCP port where the HTTP or HTTPS server is listening; it can be omitted if |
|
|
|
| using default port 80. |
|
|
|
| Note: If Auto Upgrade is set to No, DP715 will only do HTTP/HTTPS download once at |
|
|
|
| boot up. |
|
|
|
|
|
|
|
|
|
|
|
| Firmware Server Path |
| IP address or domain name of firmware server. |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Config Server Path |
| IP address or domain name of configuration server. |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| XML Config File |
| The password used for encrypting the XML configuration file using OpenSSL. |
|
| Password |
| This is required for the phone to decrypt the encrypted XML configuration file. |
|
|
|
|
|
|
|
|
|
|
|
| HTTP/HTTPS User |
| The user name needed to authenticate with the HTTP/HTTPS server. |
|
| Name |
|
|
|
|
|
|
|
|
|
|
|
|
|
| HTTP/HTTPS |
| The password needed to authenticate with the HTTP/HTTPS server. |
|
| Password |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Firmware File Prefix |
| Default is blank. If configured, DP715 will request firmware file with the prefix. This |
|
|
|
| ||
|
|
| setting is useful for ITSPs. End user should keep it blank. |
|
|
|
|
|
|
|
|
|
|
|
| Firmware File Postfix |
| Default is blank. End user should keep it blank. |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Config File Prefix |
| Default is blank. End user should keep it blank. |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Config File Postfix |
| Default is blank. End user should keep it blank. |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| Allow DHCP Option 66 |
| If set to “Yes”, configuration and upgrade server information can be obtained using DHCP |
|
| to override server |
| option 66 from DHCP server located in customer’s environment. Default setting is Yes. |
|
|
|
|
|
|
|
|
|
|
|
| Automatic Upgrade |
| Choose “Yes” to enable automatic upgrade and provisioning. If select “Check every |
|
|
|
| ||
|
|
| minutes” input the amount of minutes you want it to check for update. If select “Yes, daily |
|
|
|
| at hour” make sure to input the hour of the day you want it to check for update, e.g. for 11 |
|
|
|
| pm type 23. If select “Yes, weekly on day” make sure you input the day of the week (in |
|
|
|
| format |
|
|
|
| do the following option you select; “Always check for New Firmware at Boot up” will check |
|
|
|
| for new firmware every time the device reboots. “Check New Firmware only when F/W |
|
|
|
| pre/suffix changes” will check for updates only when the pre/suffix has been changed. |
|
|
|
|
|
|
|
|
|
|
|
| Authenticate Conf File |
| If set to Yes, config file is authenticated before acceptance. This protects the |
|
|
|
| ||
|
|
| configuration from an unauthorized change. |
|
|
|
|
|
|
|
|
|
|
|
| Firmware Key |
| Used for firmware encryption. Should be 32 digit in hexadecimal representation. End |
|
|
|
| ||
|
|
| user should keep it blank. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SSL Certificate |
| The user specifies SSL certificate used for SIP over TLS in X.509 format. |
|
|
|
|
|
|
Firmware version 1.0.0.8 | DP715/DP710 User Manual | Page 39 of 52 |
