Grandstream Networks DP710 manual Connect Your DP715/710, Equipment Packaging

CONNECT YOUR DP715/710

EQUIPMENT PACKAGING

Table 1: EQUIPMENT PACKAGING

DP715

∙1 Base unit

∙1 Handset including 2 rechargeable batteries (AAA, 1.2V / 500 mAh, NiMH)

∙1 power supply plug for the base unit

∙1 Ethernet cable

∙1 User guide

∙1 GPL License

DP710

∙1 Handset including 2 rechargeable batteries (AAA, 1.2V / 500 mAh, NiMH)

∙1 Charger unit

CONNECTING THE DP715 BASE STATION

To setup the DP715 Base Station, follow the steps below:

1.Connect the Network port of the DP715 to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable provided.

2.Connect the 6V DC output plug to the power jack on the DP715; plug the power adapter into an electrical outlet.

DP715 Back View DP715 Front View

Power Supply	Reset	RJ-45 Ports	Power	Network Registered	Call
		10/100 Mbps

(DC 6V)

Figure 1: CONNECTING THE DP715 BASE STATION

Note: When the base station boots up, it will automatically call all the registered handsets to update the date and time.

Firmware version 1.0.0.8 DP715/DP710 User Manual Page 9 of 52