Grandstream Networks GXV3651_FHD user manual Audio Settings, IP Address Configuration

GXV3651_FHD IP Camera

Audio Settings

Preferred Audio Codec – The GXV3651_FHD supports up to 2 different Vocoder types, a-law (PCMA) and u-law (PCMU). The audio can also be turned off by switching the setting to

―Disabled‖

Microphone Volume: The user can adjust the volume gain of the microphone on a range from 1 to 5

Speaker Volume: The user can adjust the speaker volume on a range from 0 to 31

Power Frequency - this setting should match the power frequency used in the country to avoid flickering in the image. Users can select between 50Hz indoor, 60Hz indoor and outdoor.

GXV3651_FHD Networking Page – Assigning an IP to the GXV3651_FHD

The GXV3651_FHD supports IP version 4. The IP address can be set automatically via DHCP, or a static IP address can be set manually. To make the GXV3651_FHD work properly, the user needs to set the DNS configuration properly. For security purposes, the user can also assign the GXV3651_FHD an HTTP Port other than 80.

IP Address Configuration

The GXV3651_FHD operates in two modes:

Dynamically Assigned via DHCP

–all the field values for the Static IP mode are not used. The GXV3651_FHD acquires its IP address from the first DHCP server it discovers on its LAN.

Statically Configured as – configure all of the following fields: IP address, Subnet Mask, Default

Firmware 1.0.1.32	Page 18 of 36
Grandstream Networks, Inc.	06/2011