Grandstream Networks GXV3651_FHD user manual GXV3651FHD Smtp, GXV3651FHD FTP, FTP Settings

GXV3651_FHD IP Camera

GXV3651_FHD SMTP Page

The SMTP server is used to send out emails when an alarm event or motion detection is triggered. The SMTP settings must be configured to make sure the alarm email is sent out properly.

SMTP Server Settings

Enable SMTP – Checked to enable SMTP SMTP Server – The IP or hostname of the SMTP server, for example, smtp.gmail.com.

SMTP Server Port – The port of the SMTP server. The GXV3651_FHD supports port 25 and SSL port 465, which is for SMTP with an encrypted connection. From E-Mail Address – The email address that sends out the alarm email(s). To E-Mail Address – The email addresses that the alarm email(s) will be sent to. You can have up to 3 emails configured.

User Name/ Password – The user name and password required to log in to your SMTP server, for example, 123@gmail.com/123.

SSL – Checked if the SMTP server requires a secure connection.

Test Email Account Settings – Click the Test button to send a test email from the From E-Mailto the To E-Mailto make sure that SMTP is configured properly. If the receiver can get the test email, then the SMTP settings are ready to go.

GXV3651_FHD FTP Page

The FTP server is used to store video files if you configure the GXV3651_FHD to record video and upload it to the FTP server when an alarm event or motion detection is triggered.

FTP Settings

Enable FTP – The default setting is ―No,‖ if you want the GXV3651_FHD to upload the recorded video to the FTP server when an alarm is triggered, set this field to ―Yes.‖ FTP Server – The IP address or hostname of the SMTP server, ie. ftp.myserver.com.

Firmware 1.0.1.32	Page 25 of 36
Grandstream Networks, Inc.	06/2011