Great Dane GDB10030, GDB10025 Service Lubrication, Grease, Spray Lubricant, Lubrication Points

SERVICE LUBRICATION

Service Lubrication

Grease

IMPORTANT: Avoid damage! If operating outside that temperature range, contact your Servicing dealer for a special-use grease.

Use a general all-purpose grease with an NLGI grade No.2 rating.

Wet or high speed conditions may require use of a special- use grease. Contact your Servicing dealer for information.

Spray Lubricant

Use a general-purpose petroleum-based spray lubricant.

Lubrication Points

H	I
H
J
	F	D
C		B
		A
D	A	B
		MX18835

•Grease caster wheel bearings (A).

•Grease caster wheel pivot bushings (B).

•Grease cutter housings (C) (two on 36-Inch mower deck, three on 48 and 52-inch mower decks).

•Grease idler arm bushings (D).

E

MX15287

•Apply grease to three spindle bearings (E), until grease is expelled from vent on spindle housings.

•Lubricate mower deck idler pulleys (F).

NOTE: Use spray lubricant to lubricate the following items:

•Lubricate speed control lever pivot shaft (G).

•Lubricate throttle control cable (H).

•Lubricate choke control cable (I) if independent.

•Lubricate hydro pump lower control arms on both sides

(J).

Service Lubrication - 13