ASSEMBLY
steering/reverse control grips and observe drive wheel rotation. The drive wheels should rotate in the correct direction.
5.Squeeze the steering reverse control grips to the reverse position and observe drive wheel rotation. The drive wheels should rotate in the correct direction.
6.Move PTO clutch switch to on position; mower clutch should engage. Run blades for several minutes.
7.Move PTO clutch switch to off position and shut the engine off.
8.Check all belts for proper tension.
9.Start the engine and test drive the machine in an open area. Drive the machine forward; if the machine drifts to the right or left, adjust the transmission control linkage.
Assembly - 34
