TROUBLESHOOTING | |
|
|
|
|
If | Check |
|
|
|
|
Battery Will Not Charge | Loose or corroded battery or ground connections. |
| Blown fusible link (charging circuit). |
| Battery cables and terminals are dirty. |
| Dead cell in battery. |
|
|
PTO Clutch Does Not Engage | Blown |
| Faulty PTO switch. |
| Faulty PTO clutch. |
| Loose PTO clutch connections. |
|
|
Starter Turns Slowly | Loose or corroded battery or ground connections. |
| Low battery power - charge battery. |
| Engine oil viscosity too heavy. |
| Transaxle linkages failed and are engaged. |
|
|
Machine |
|
|
|
If | Check |
|
|
|
|
Excessive Machine Vibration | Engine speed too slow. |
| Deck drive belts worn or damaged. |
| Traction drive belt worn or damaged. |
| Dirt or debris on drive sheaves. |
| Loose or damaged electric PTO or drive sheave. |
| Bent or damaged cutting blades. |
|
|
Machine Will Not Move With Engine Running | Park brake locked. |
| Transmission hydraulic oil level low. |
| Transmission oil cold - allow engine to warm. |
| Traction drive belt slipping. |
| Transaxle |
| Traction drive belt damaged or worn. |
| Transaxle and/or wheel motor problems. See your Great Dane |
| servicing dealer. |
|
|
Machine Creeps With Engine Running and Motion | Needs shift control linkage adjustment. |
Control Levers in a Neutral Position |
|
|
|
Park Brake |
|
|
|
If | Check |
|
|
|
|
Park Brake Not Working Correctly | Brakes out of adjustment - adjust linkage. |
| Brake linkage or components damaged. |
|
|
|
|
Troubleshooting - 29
