Operating - 7
OPERATING
Operating
Daily Operating Checklist
❏Test safety systems.
❏Check tire pressure.
❏Check fuel level.
❏Check engine oil level.
❏Remove grass and debris from machine.
❏Clean air intake screen.
❏Check area below machine for leaks.
Console Controls
MX9263
A - Speed Control Lever
B - Tracking Adjustment Knob
C - Operator Presence Control Lever
D - Neutral Lock Lever
E - Handlebar Grip
F - Steering/Reverse Control Grip Lever
G - Throttle Lever/Choke Control (choke may be
individual control on some models)
H - PTO/Clutch Switch
I - Key Switch
Miscellaneous Controls
MX18837 MX9264
A - Transmission Drive/Bypass/Park Brake
Selector
B - Fuel Shutoff Valve
Testing Safety Systems
Use the following checkout procedure to check for normal
operation of machine.
If there is a malfunction during one of these procedures, do
not operate machine. See your Great Dane dealer for
service.
A
B
C
DD
FF
E
G
HI
E
C
c CAUTION: Avoid injury! Engine exhaust fumes
contain carbon monoxide and can cause
serious illness or death.
Move the vehicle to an outside area before
running the engine.
Do not run an engine in an enclosed area
without adequate ventilation.
• Connect a pipe extension to the engine
exhaust pipe to direct the exhaust fumes out of
the area.
• Allow fresh outside air into the work area to
clear the exhaust fumes out.
B
A
A