Great Dane GDB10028, GDB10025 manual Introduction, Using Your Operator’s Manual, Special Messages

INTRODUCTION

Introduction

Using Your Operator’s Manual

This manual is an important part of your machine and should remain with the machine when you sell it.

An engine manufacturer’s owner’s manual has been provided with your machine. This will provide maintenance and troubleshooting information for the engine installed in your machine.

Reading your operator’s manual will help you and others avoid personal injury or damage to the machine. Information given in this manual will provide the operator with the safest and most effective use of the machine.

Sections in your operator’s manual are placed in a specific order to help you understand all the safety messages and learn the controls so you can operate this machine safely. You can also use this manual to answer any specific operating or servicing questions.

The machine shown in this manual may differ slightly from your machine, but will be similar enough to help you understand our instructions.

RIGHT-HAND and LEFT-HAND sides are determined by facing in the direction the machine will travel when going forward. When you see a broken line (------), the item

referred to is hidden from view.

Special Messages

Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage.

cCAUTION: Avoid injury! This symbol and text highlight potential hazards or death to the operator or bystanders that may occur if the hazards or procedures are ignored.

IMPORTANT: Avoid damage! This text is used to tell the operator of actions or conditions that might result in damage to the machine.

NOTE: General information is given throughout the manual that may help the operator in the operation or service of the machine.

Record Identification Numbers

Scamper HG

GDB10025 (15 hp, Recoil, 36-Inch Deck) Serial No. (TCHR15W010001-

GDB10026 (15 hp, Recoil, 48-Inch Deck) Serial No.

(TCHR15W010001-

GDB10027 (17 hp, Recoil, 48-Inch Deck) Serial No. (TCHR17W010001-

GDB10028 (17 hp, Electric, 48-Inch Deck) Serial No. (TCHE17W010001-

GDB10029 (17 hp, Recoil, 52-Inch Deck) Serial No. (TCHR17W010001-

GDB10030 (17 hp, Electric, 52-Inch Deck) Serial No. (TCHE17W010001-

If you need to contact an Authorized Service Center for information on servicing, always provide the product model and serial numbers.

You will need to locate the model and serial numbers for the machine and for the engine of your machine and record the information in the spaces provided below.

DATE OF PURCHASE:

_________________________________________

DEALER NAME:

_________________________________________

DEALER PHONE:

_________________________________________

B

A

MX18836

MODEL NUMBER (A):

__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

SERIAL NUMBER (POWER UNIT) (A):

__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

ENGINE SERIAL NUMBER (B):

__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

ENGINE SPECIFICATION NUMBER (B):

__ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __

Introduction