Assem ly Step 5
3Damper Plates
Phillips Head
Screwdriver
HAROWARE0AG
3/8" | |||
Wrench | |||
3 Required | 3 Required | 3 Required |
|
1.Set one damper plate on top of the cabinet and line it up with the corresponding "butterfly" holes.
2.Insert a bolt from the top through the center hole.
3.From the bottom side, place a lock washer and nut on the bolt as shown,
4.Thread the nut just tight enough to keep the damper
plate snug. It should be able to rotate with little | Bolt |
resistance. |
|
Damper
5.Repeat steps for the 2 remaining side dampers.
Lock Washer
Nut
