![](/images/new-backgrounds/1150825/15082529x1.webp)
Assem
Door Handle Kit
Handle Spring,
Handle Washer,
Mounting Plate
ly Step
HARDWARE BAG _
Phillips Head
Screwdriver
1.Slide the handle washer onto the end of the door handle, followed by the handle spring as shown.
2.Feed the door handle into the hole through the front of the door panel.
3.From the back side of the door panel, insert the mounting plate over the end of the handle as shown.
4.With lock washers placed on the bolts, insert the bolts through the mounting plate, into the
13