![](/images/new-backgrounds/1150825/15082533x1.webp)
Assem ly Step 1t
HARDWARE BAG
Pliers
Using the zip tie, secure the hose to the front leg as shown. Do not pull the zip tie tight - leave it just loose enough so that the hose can be adjusted if needed.
Tying the hose to the leg helps prevent the hose from coming into contact with the hot burner chamber.
Inspect the installation underneath
the smoker to ensure that the hose is
not rubbing any portion of the burner chamber.
Crimp
OR
Place one end of the
2_ Using a set of pliers, crimp the
3_ When an LP tank is not attached to the smoker, use the
Assembly is now complete! Please follow all instructions
and safeguards on the following pages for connecting the LP tank.
15