Grizzly G0450 instruction manual Maintenance, Schedule, Cleaning, Lubrication, Daily Check

SECTION 6: MAINTENANCE

Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.

Schedule

For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section.

Daily Check:

•Loose mounting bolts.

•Worn switch.

•Worn or damaged cords or plugs.

•Damaged V-belts.

•Any other unsafe condition.

DO NOT attempt to investigate or adjust any features of the machine while it is run- ning. Wait until the machine is turned OFF, unplugged, and all working parts have come to a rest before you do anything!

Cleaning

Cleaning the Model G0449/G0450 is relatively easy. From time to time vacuum wood dust off of the internal components, especially the motor.

-26-

Lubrication

Moving parts such as chains should be lubricated periodically with a light machine oil. Motor bear- ings need no lubrication.

Use only adequate lubrication. Too much lubri- cant will attract dirt and sawdust and will clog the chain mechanism.

Pillow Bearing: Must be lubricated every 20 hours of operation. Use a high-quality, lithium- based grease. A grease fitting (Figure 23) is located on the top of each pillow bearing.

Figure 23. Location to lubricate pillow bearing.

Gearbox: The oil in the gearbox should be changed every 500 hours with new SAE 80W gear oil.

1.Remove the motor cover, loosen the four hex bolts that secure the gear box to the motor bracket, and remove the V-belt.

G0449/G0450 37" Drum Sander