START/STOP Switch | Guide Post |
The START/STOP switch on the Model G0513X/ G0514X/G0514X3 is located on the column for easy access (Figures 37 & 38). Immediately turn the machine OFF if there becomes a safety hazard.
The guide post, shown in Figure 39, connects the upper blade guide assembly to the bandsaw. The guidepost allows the blade guide assembly to move up or down via a rack and pinion. In order to cut accurately, the blade guide assembly must be no more than 1" from the top of the workpiece at all
Guide Post
Lock Knob
Figure 37. G0513X START/STOP switch.
Figure 38. G0514X/G0514X3 START/STOP switch.
The Model G0514X/G0514X3 features a switch disabling lock to prevent unauthorized starting of the machine. To disable the switch, turn the key to "0". To enable the switch, turn the key to "1".
Guide Post
Handwheel
Figure 39. Guide post controls. To adjust guide post:
1.Make sure that the blade tension, blade tracking, support bearing, and blade guides are adjusted correctly.
2. | Loosen the guide post lock knob shown in |
| Figure 39. |
3. | Turn the guide post handwheel to raise or |
| lower the guide post until the upper blade |
| guide assembly is within 1" from the top of |
| the workpiece. |
4. | Lock the guide post in place with the lock |
| knob. |
G0513X/G0514X/G0514X3 Extreme Series Bandsaw |