Air Circuit Filters |
| Clean Sanding Belts |
|
|
|
|
|
|
The air filter on the Model G0527 is located on the main regulator (Figure 16). Empty the filter trap as it becomes filled with moisture and dirt. The internal white filter should be replaced year- ly.
You can greatly increase the lifespan of your sanding belts if you clean them often. As men- tioned on page 35, cleaning pads are the fastest way to clean wood dust from the sanding belts.
Regulator
Filter Trap
Drain Valve
Figure 16. Regulator filter trap. Push lower
drain valve to empty it.
G0527 18" Wide Belt Sander |
