SECTION 7: MAINTENANCE
GeneralSchedule
Your safety is important! Please follow the warnings below during this entire section:
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
| Disconnect power to the | |||
ON | |||||||
|
| machine when perform- | |||||
|
|
|
| ||||
|
|
|
| ing maintenance, assem- | |||
OFF |
|
| bly or adjustments. | ||||
|
| Failure to do this may | |||||
|
|
|
| ||||
|
|
| |||||
|
|
|
| result in serious person- | |||
|
|
|
| al injury. | |||
|
|
|
|
|
|
| |
Loose hair and clothing could get caught in machinery causing seri- ous personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.
Wear safety glasses dur- ing the entire mainte- nance process. Failure to comply may result in serious personal injury.
The following items should be checked each time the sander is used:
•Loose mounting bolts.
•Damaged sanding belt.
•Worn or damaged wires.
•Air line water collection cup is filled with water.
•Any other condition that could hamper the safe operation of this machine.
Weekly:
•Grease the eight fittings located on the feed belt roller axles and the sanding belt roller axles. They are identified with yellow stick- ers.
Monthly:
•Apply a generous amount of grease to the table elevation screws. Be sure to cover the adjustment screws with the dust covers when finished.
•Remove the lower side panel to access the table lifting mechanism. Apply a generous amount of grease to the chain and gears associated with the table lifting mechanism. Be careful to not get grease on any of the V- belts. This could cause them to slip off their pulleys.
•Apply a generous amount of
G0527 18" Wide Belt Sander |
