Grizzly G0527 instruction manual Minimum Cord Size Extension Cords, Grounding

Minimum Cord Size Extension Cords

For 220V single-phase operation, use the follow- ing power cord:

Cord	2 Pole, 3 Wire
Gauge	6

Because of the high amperage draw from this machine, we do not recommend the use of exten- sion cords. Instead, position your equipment near installed wiring to eliminate the need for exten- sion cords.

Grounding

Electrocution or a fire can result if the machine is not grounded correct- ly. Make sure all electri- cal circuits are ground- ed. DO NOT use the machine if it is not grounded.

In the event of an electrical short, grounding pro- vides electric current a path of least resistance to reduce the risk of electrical shock to the operator. Ground the power cord and this machine in accordance with all local codes and ordinances.

Operating this machine when it is not properly grounded can result in electric shock or electro- cution.

We have covered some basic electrical requirements for the safe operation of your machine. These requirements are not nec- essarily comprehensive. You must be sure that your particular electrical configuration complies with local and state codes. Ensure compliance by checking with your local municipality or a licensed electrician.

G0527 18" Wide Belt Sander -7-