Grizzly To install the sliding table, Installing rails on table G0560 Meat-Cutting Bandsaw

Figure 20. Blade guard installed.

4.Secure the blade guard in place with two knob screws on each side.

Table

The sliding table allows you to move the blade through the meat.

Components and Hardware Needed:	Qty
Sliding Table	1
Rail	2
Force Plate	1
Knob Screw M6-1 x 12	4
Hex Bolt M6-1 x 12	4
Flat Washer 6mm	4
To install the sliding table:

1.Secure one end of each rail to the underside of the sliding table as shown in Figure 21. Note—Secure the rail ends to the closed side of the sliding table.

Figure 21. Installing rails on table.

-18- G0560 Meat-Cutting Bandsaw