Fence
The fences allow you to support the meat as you slide it through the blade while also controlling the thickness of cut.
Components and Hardware Needed: | Qty |
Fence Support Brackets | 2 |
Hex Bolts | 4 |
Fence Shafts | 2 |
Fences | 2 |
Knob Screws | 4 |
Flat Washer | 4 |
Tools Needed: |
|
Wrench 10/12mm | 1 |
To install the fence: |
|
1.Use the
Figure 25. Fence supports to table.
2.Insert the fence shafts into the fences and secure them in place with the knob screws (Figure 26).
Figure 26. Fences assembled.
3.Slide the long fence into the bracket on the left and the short fence into the bracket in front (Figure 27).
4.Secure the fence assemblies in the brackets with knob screws.
Figure 27. Fences installed on supports.
G0560 |
