![](/images/new-backgrounds/1283300/28330045x1.webp)
3.Remove the control panel surrounding plate and the cover.
4.Replace the 220V magnetic switch (Figure 7) with the 440V magnetic switch. Set the dial on the new overload relay to 11A.
Note: The magnetic switch consists of the magnetic contactor and the overload relay.
Magnetic
Contactor
| Overload |
Overload | Relay Dial |
| |
Relay |
|
| |
Figure 7. Magnetic switch. |
5.Replace the control panel cover, surrounding plate, and the cover plate.
6.Open the motor cabinet door and remove the motor wiring cover (see Figure 8).
Motor Wiring
Cover
Figure 8. Motor location.
7.Rewire the motor per the diagram on the inside of the motor wiring cover.
G0588/G0591 12" Sliding Table Saws |