![](/images/new-backgrounds/1283300/28330051x1.webp)
Clean Up | Inventory | |
|
|
|
|
|
|
The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a sol- vent cleaner or
Gasoline and petroleum products have low flash points and could cause an explosion or fire if used to clean machinery. DO NOT use gasoline or petroleum products to clean the machinery.
Many of the solvents commonly used to clean machinery can be toxic when inhaled or ingest- ed. Lack of ventilation while using these sol- vents could cause seri- ous personal health risks or fire. Take precautions from this hazard by only using cleaning solvents in a well ventilated area.
After all the parts have been removed from the two boxes, you should have the following items:
Crate 1 | Qty | |
A. Saw Base Unit (Not Shown) | 1 | |
B. | Large Extension Wing | 1 |
C. | Small Extension Wing | 1 |
D. | Support Leg | 1 |
B | C |
D
Figure 11. Extension table components.
E.Rip Fence Round Rail w/M12 Studs,
| Washers, and Nuts | 1 |
F. | Square Tube w/Scale | 1 |
G. | Rip Fence Body | 1 |
H. | Rip Fence Lock Handle | 1 |
I. | Aluminium Rip Fence | 1 |
E
F
I
G
H
Figure 12. Rip fence components.
G0588/G0591 12" Sliding Table Saws |