SECTION 4: OPERATIONS
Operation Overview
The purpose of this overview is to provide the nov- ice machine operator with a basic understanding of how the machine is used during operation, so the machine controls/components discussed later in this manual are easier to understand.
Due to the generic nature of this overview, it is not intended to be an instructional guide. To learn more about specific operations, read this entire manual and seek additional training from expe- rienced machine operators, and do additional research outside of this manual by reading "how- to" books, trade magazines, or websites.
To reduce the risk of serious injury when using this machine, read and understand this entire manual before operating.
Damage to your eyes and lungs could result from using this machine without proper pro- tective gear. Always wear safety glasses and a respirator when operating this machine.
NOTICE
If you have never used this type of machine or equipment before, We strongly rec- ommend that you read books, review industry trade magazines, or get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
To complete a typical operation, the operator does the following:
1.Examines the workpiece to make sure it is suitable for sanding.
2.Adjusts the table tilt and miter gauge, if nec- essary, to the correct angle for sanding.
3.Puts on safety glasses and a respirator, and locates push blocks if needed.
4.Starts the sander.
5.Feeds the workpiece along the disc, firmly holding it against the table and gauge while keeping hands and fingers away.
6.Stops the machine.
Model G0724 (Mfg. Since 09/11)
