Grizzly G1005Z owner manual Circuit Requirements, 110/220V Operation, Amperage Draw, Plug Type

SECTION 2: CIRCUIT REQUIREMENTS

110/220V Operation

Serious personal injury could occur if you connect the machine to the power source before you have completed the set up pro- cess. DO NOT connect the machine to the power source until instructed to do so.

Amperage Draw

The Model G1005Z features a 110/220V motor that is prewired for 110V and draws the following amps under maximum load:

Motor Draw at 110V	12	Amps
Motor Draw at 220V	6	Amps

Circuit Requirements

We recommend using a dedicated circuit for this machine. You MUST connect your machine to a grounded circuit that is rated for the amperage given below. Never replace a circuit breaker on an existing circuit with one of higher amper- age without consulting a qualified electrician to ensure compliance with wiring codes. If you are unsure about the wiring codes in your area or you plan to connect your machine to a shared circuit, consult a qualified electrician.

110V Circuit	15 Amps
220V Circuit	15 Amps

G1005Z Mill/Drill

Plug Type

The Model G1005Z comes prewired with a NEMA 5-15 plug. If you wish to rewire the motor to 220V we recommend using the following plug (see Figure 2 for an example):

220V Plug & Receptacle NEMA 6-15

Figure 2. NEMA 6-15 plug and outlet.

-9-