MountingAssembly
The Model G1005Z must be mounted to a workbench or stand before it can be safely used.
If mounting to a stand, follow the mounting instructions included with the stand. We recommend using the Grizzly Model G5943 stand, which can be found in SECTION 5: ACCESSORIES on Page 25.
For workbenches, the strongest mounting option is a "through mount" where holes are drilled all the way through the workbench, and hex bolts, washers, and hex nuts are used to secure the mill/drill to the workbench.
����
�����������
������������
���������
�����������
�����������
�������
Figure 5. Example of a through mount setup.
Another option for mounting is a "direct mount" where the machine is simply secured to the work- bench with a lag screw.
���������
�����������
������������
���������
Figure 6. Example of a direct mount setup. -14-
The Model G1005Z must be completely assembled before it can be safely used.
To assemble the Model G1005Z:
1.Thread the downfeed handle knobs onto the downfeed handles.
2.Thread the downfeed handles into the pinion hub, as shown in Figure 7.
