IV. Site Planning

A. Working Clearances

Be sure that there is plenty of room around your saw before cutting. Relocate any items that risk contamination and cannot be easily washed. Allow yourself sufficient room to run your saw IN ANY FORESEEABLE OPER-

ATION.

B. Lighting and Outlets

Lighting should be bright enough to eliminate shadow and prevent eye strain. Electrical cir- cuits should be dedicated or large enough to handle combined motor amp loads. Outlets should be located near the machine so power or extension cords are not obstructing high- traffic areas. Be sure to observe local electri- cal codes for proper installation of new light- ing, outlets, or circuits.

End of Section

V. Unpacking

The bandsaw is shipped from the factory in a carefully packed carton. If you find the machine to be damaged after you’ve signed for delivery and the truck and driver are already gone, you will need to file a freight claim with the carrier. Save the containers and all packing materials for inspection by the car- rier or their agent. Without the packing materi- als, filing a freight claim can be difficult. If you need advice regarding this situation, please call us immediately.

Caution: The meat cutting saw is a HEAVY machine (106 lbs. shipping weight). DO NOT over-exert yourself while unpacking or moving your machine – get assistance. In the event that your bandsaw must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the combined weight of people and the machine.

When you are completely satisfied with the condition of your shipment, you should inven- tory its parts.

End of Section

Hunter’s Meat Cutting Bandsaw - 5 -

Page 8
Image 8
Grizzly G1016 instruction manual IV. Site Planning, Unpacking, Working Clearances, Lighting and Outlets