VI. Piece Inventory
With all the parts removed from the container, you should have:
•Bandsaw Unit with Blade
•Motor
•Motor Pulley
•
•Table
•Fence
•Column Guard
•Blade Guard
•Table & Guard Knobs (13)
•Stand Parts (5)
•Stand Enclosures (2)
•Motor Mounting Brackets (2)
•Meat Grinder
•Plastic Pestle
•Casing Tube
•Fasteners
If anything is missing, call or write the cus- tomer service department. If anything is dam- aged, please follow the procedures described in Section V above.
Below is a list of fasteners required to assem- ble your bandsaw. If any standard hardware is missing (e.g., a nut or bolt), we will be happy to replace it, but it would be quicker to buy replacements from your local hardware store. However, if an unusual amount of fasteners or proprietary parts are missing, please let us know. A full parts list and breakdown can be found toward the end of this manual.
QTY. | DESCRIPTION | LOCATION |
22 | 5/16" - 18 x 5/8" Carriage Bolts | Stand |
30 | 5/16" - 18 Hex Nuts | Stand |
34 | 5/16" Flat Washers | Stand |
4 | Foot Assemblies | Stand |
4 | 5/16" - 18 x 3/4" Hex Bolts | Motor |
3 | 3/8" - 16 Threaded Studs | Stand/Bandsaw Body |
4 | 90° Brackets | Stand |
|
|
|
Figure 1 shows the bolt bag contents.
End of Section
-6 - Hunters Meat Cutting Bandsaw
