G1022 Series Contractor Saws -45-
The following pages contain general machine
data, parts diagrams/lists, a troubleshooting guide
and Warranty/Return information for your Model
G1022 Series.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service Department.
Our trained service technicians will be glad to help
you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in Section
3 Introduction.
We have included some important safety mea-
sures that are essential to this machine’s opera-
tion. While most safety measures are generally
universal, each workshop is different and safety
rules should be considered as they apply to your
specific situation.
We recommend you keep a copy of our current
catalog for complete information regarding war-
ranty and return policy. If you need additional
technical information relating to this machine, or if
you need general assistance or replacement
parts, please contact the Service Department list-
ed in Section 3 Introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
SECTION 8: CLOSURE
The Model G1022 Series was specifically
designed for wood cutting operations. DO
NOT MODIFY AND/OR USE THIS MACHINE
FOR ANY OTHER PURPOSE. Modifications
or improper use of this tool will void the
warranty. If you are confused about any
aspect of this machine, DO NOT use it until
all your questions have been answered or
serious personal injury may occur.
Like all power tools, there is danger asso-
ciated with the Model G1022 Series.
Accidents are frequently caused by lack of
familiarity or failure to pay attention. Use
this tool with respect and caution to
lessen the possibility of operator injury. If
normal safety precautions are overlooked
or ignored, serious personal injury may
occur.
Operating this equipment creates the poten-
tial for flying debris to cause eye injury.
Always wear safety glasses or goggles
when operating equipment. Everyday glass-
es or reading glasses only have impact
resistant lenses, they are not safety glasses.
Be certain the safety glasses you wear meet
the appropriate standards of the American
National Standards Institute (ANSI).