MACHINE DATA
SHEET
Customer Service #: (570)
GRIZZLY MODEL G1022Z TABLE SAW
Design Type | Floor Model | ||
Overall Dimensions: |
|
|
|
Table Height |
| 37" | |
Table Size | 271Ú8" D x 201Ú8" W | ||
Table Size With Extension Wings | 271Ú8" D x 405Ú8" W | ||
Table With Wings and Fence Rails | 48" W x 44" D | ||
Miter Gauge | 3Ú8" x 3Ú4" | ||
Weight (Net) | 240 lbs. | ||
Weight (Shipping) | 250 lbs. | ||
Box # 1 Size | 36" L x 181Ú2" W x 25" H | ||
Box # 2 Size | 46" L x 3" W x 2" H | ||
Box # 3 Size | 12" L x 12" W x 5" H | ||
Footprint | 21" x | 25" | |
Construction: |
|
|
|
Table | Ground Cast Iron | ||
Stand | |||
Miter Gauge | Aluminum Ú Steel | ||
Trunnions | Cast Iron | ||
Bearings | Shielded and Lubricated Ball Bearings | ||
Fence | Single Lever ; Front & Rear Locking w/ Micro Adjust Knob; | ||
.............................................................. | Heavy Extruded Aluminum with Tee Slot Top | ||
Rails | 44" x 13Ú8" Chrome Plated Tubing | ||
Guard | Steel and Clear Plastic | ||
Wings | Ground Cast Iron, Open Ribbed Design | ||
Cutting Capacity: |
|
|
|
Maximum Blade Diameter | ........................................................................................ | 10" | |
Maximum Depth of Cut at 90¡ | 31Ú8" | ||
Blade Tilt | |||
Maximum Depth of Cut at 45¡ | 21Ú8" | ||
Maximum Rip to Right of Blade (Standard) | 24" | ||
Maximum Rip to Right of Blade (Optional Extension Rails) | 48" | ||
Maximum Rip to Left of Blade | 11" | ||
Distance from Front of Table to Center of Blade | 17" | ||
Distance from Front of Table to Front of Blade | 12" | ||
Maximum Width of Dado Cut | 13Ú16" | ||
Motor: |
|
|
|
Type | TEFC Capacitor Start Induction | ||
Horsepower | 11Ú2 H.P. | ||
Phase / Cycle | Single Phase Ú 60 HZ | ||
Voltage | 110 Ú 220V | ||
Prewired | 110V | ||
Amps | 16 Ú 8A | ||
Hertz and R.P.M | 60Hz Ú 3450 R.P.M. | ||
Power Transfer | Belt Drive | ||
Switch | ON/OFF Push Button | ||
Arbor: |
|
|
|
Dimension | 5Ú8" x 11Ú4" | ||
Speed | 4,700 R.P.M. | ||
Features: |
|
|
|
........................................Includes Table Inserts for Standard Blade and Dado Blade
Specifications, while deemed accurate, are not guaranteed.
G1022 Series Contractor Saws |
