SECTION 4: ASSEMBLY
Beginning Assembly
!Disconnect power to the machine when perform- ing any maintenance,
assembly or adjust- ments. Failure to do this may result in serious personal injury.
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
Wear safety glasses dur- ing the entire assembly process. Failure to com- ply may result in serious personal injury.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
Most of your Model G1022 Series has been assembled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps. Please follow along in the order presented here.
TOOLS REQUIRED: High quality square and straightedge, metric Allen¨ wrench set, flat screw- driver, Phillips¨ screwdriver, dead blow hammer and a 6" or 8" adjustable wrench.
G1022 Series Contractor Saws
Stand Assembly
The Model G1022 Series is supplied with a
1.Fasten the plastic feet to all four legs using the
