Grizzly G1023 instruction manual Beginning Assembly Hand Wheels

SECTION 3: ASSEMBLY

Beginning Assembly Hand Wheels

Most of your Model G1023 Table Saw has been assembled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps. Please follow along in the order presented here.

Note: All die-cut metal parts have a sharp edge (called “flashing”) on them after they are formed. This is removed at the factory. Sometimes, though, a bit of flashing might escape inspection. Please examine the edges of all metal parts before handling them.

TOOLS REQUIRED: A high quality square and long straightedge plus common hand tools are necessary to assemble this machine. You will need a set of open and closed ended metric wrenches, a flat tipped screwdriver, Phillips screwdriver, dead blow hammer, and a 6" or 8" adjustable wrench.

The handle on the arbor tilting hand wheel has been installed backward for shipping.

Unscrew it and then reinstall it in the correct posi- tion. Figure 2.

Figure 2.

-8- G1023 Heavy-Duty Table Saw