Fence
The mounting holes in the rails are not centered on the length of the rails. This way, you can mount the rails so that maximum fence travel will be greater on one side or the other.
To mount the rails:
1.Secure the fence rails to the table with the four (4)
Rail Spacers
Figure 13. Fence rails properly secured to table.
2.Screw the fence locking handle into its posi- tion on the cam on the fence headstock. Move it to the loose (up) position.
3.Slide the fence onto the fence rails as shown in Figure 14.
NOTICE
When the fence is to the left of the blade, the fence must be positioned near the cen- ter of the table in order to open the lower wheel cover.
Figure 14. Fence mounted on rails.
There are two ways to remove the fence:
1.Remove the blade so the fence slides off the rails.
2.Dismount the rails by removing the cap screws.
G1073/G1073Z 16'' Bandsaw |
