Guard |
| Dust Port |
|
|
|
|
|
|
Place the belt guard over the step pulley and secure it, as shown in Figure 15, to the stand using the
Belt Guard
Dust Port
Figure 15. Belt guard and dust port mounted
correctly on bandsaw.
The Model G1073 comes standard with a 21Ú2" dust port for dust collection. It mounts to the lower rear casting body. This port can be connected directly to a 21Ú2" Shop¥Vac¨ hose or adapted to fit a standard 4" dust collector hose by using the Grizzly Model G3119 adapter between a 21Ú2" and 4" hose.
To mount the dust port:
1.Remove the four dust port mounting screws from the bandsaw body and position the dust port as shown in Figure 15.
2.Replace the screws and secure the dust port to the bandsaw body.
|
|
|
|
|
|
|
|
|
| G1073/G1073Z 16" Bandsaw | |
|
|
