Grizzly G4000 manual Tailstock Controls, Single tool holder

Tool post - A four-way tool post is supplied with the Model G4000. Cutting tools can be attached and removed by tightening or loosening the clamping bolt. Figure 19.

Figure 19. Four-way tool post.

Single Tool Holder - A single-tool tool holder is supplied with the Model G4000. A cutting tool can be installed by tightening or loosening the clamping bolt. Figure 20.

Figure 20. Single tool holder.

Tailstock Controls

Tailstock Handwheel - Turning the handwheel advances or retracts the barrel in the tailstock. The graduated scale on the handwheel is adjustable.

Lock Lever - This lever locks the tailstock barrel in place.

Clamping Nut - The clamping nut locks the tail- stock in place on the lathe bed.

Adjustment Setscrews - These setscrews are used for aligning the tailstock to the spindle. This is covered in the next section.

Lock Lever

Clamping Nut

Handwheel

Adjustment Screws

Figure 21. Detail of tailstock controls.

-16- G4000 9'' x 19'' Lathe