Meat Grinder
The Model G5787 comes with a meat grinder. Before assembling this for use, clean and sanitize its parts. See Section 5: Sanitization for details on sanitizing. Figure 25 shows the meat grinder components.
Figure 25. Meat grinder components .
To install the meat grinder:
1.Line up the fixed key on the meat grinder to the keyway on the housing shown in Figure 26.
2.Spin the pulley wheel by hand to line up the grinder tongue so it will fit into the groove on the auger.
3.Slide the meat grinder all the way into the housing and tighten the split collar to secure the grinder in place.
The meat grinder should not be attached to the saw when not in use. The open chute and spinning auger easily invite an accident if not being attended to.
Keyway
Figure 26. Installing meat grinder.
The meat grinder comes with a sausage stuffer attachment. To install this:
1.Remove the collar from the end of the meat grinder.
2.Fit the collar over the sausage stuffer.
3.Place the collar back on the meat grinder as shown in Figure 27, and thread it tight so it is secured to the meat grinder.
Figure 27. Attaching sausage stuffer.
G5787 Meatcutting Bandsaw |
