Safety Instructions For Power Tools

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace exten- sion cords if they become damaged.

Minimum Gauge for Extension Cords

 

 

LENGTH

 

 

AMP RATING

25ft

 

50ft

 

100ft

 

 

 

 

 

 

 

0-6

18

 

16

 

16

 

7-10

18

 

16

 

14

 

11-12

16

 

16

 

14

 

13-16

14

 

12

 

12

 

17-20

12

 

12

 

10

 

21-30

10

 

10

 

No

 

 

 

 

 

 

 

10.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair cov- ering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safe- ty glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool.

13.NEVER OVERREACH. Keep proper foot- ing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubri- cating and changing accessories.

15.DISCONNECT TOOLS before servicing and changing accessories, such as blades, bits, cutters, and the like.

16.REDUCE THE RISK OF UNINTENTION- AL STARTING. Make sure switch is in off position before plugging in.

17.USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recom- mended accessories. The use of improper accessories may cause risk of injury.

18.CHECK DAMAGED PARTS. Before fur- ther use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, bind- ing of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

19.NEVER LEAVE TOOL RUNNING UNAT- TENDED. TURN POWER OFF. Do not leave tool until it comes to a complete stop.

20.NEVER USE UNDER THE INFLUENCE of alcohol or drugs, or when tired.

21. NEVER ALLOW UNSUPERVISED OR

UNTRAINED PERSONNEL TO OPER- ATE THE MACHINE. Make sure any instructions you give in regards to the operation of the machine are approved, correct, safe, and clearly understood.

G5787 Meatcutting Bandsaw

-3-

Page 4
Image 4
Grizzly G5787 instruction manual Length AMP Rating

G5787 specifications

The Grizzly G5787 is a premium woodworking tool designed for serious woodworkers and professionals alike. This machine is a powerful hybrid table saw that combines advanced technology with user-friendly features, making it a staple in any woodworking shop.

One of the standout features of the Grizzly G5787 is its robust 2 HP motor, which provides ample power for cutting through hardwoods and other dense materials with ease. The saw operates smoothly and efficiently, ensuring clean and accurate cuts every time. The motor is also designed for quiet operation, minimizing noise in the workshop environment.

The G5787 incorporates a precision ground cast iron tabletop, which measures 27 inches by 40 inches. This heavy-duty surface not only offers a stable work area but also enhances the saw's overall durability. The table features T-slots for easy attachment of jigs and fixtures, providing added versatility for various cutting tasks.

Another notable characteristic of the Grizzly G5787 is its incredible cutting capacity. With a maximum blade height of 3 1/8 inches at 90 degrees and 2 1/4 inches at 45 degrees, it allows woodworkers to tackle a wide array of projects with confidence. The saw also comes with a 30-inch rip fence system, which is engineered for quick adjustments and optimal accuracy.

The G5787 is equipped with advanced safety features, including a removable riving knife and a blade guard, both of which help prevent kickback and enhance user safety during operations. This attention to safety is crucial for both novice and experienced woodworkers.

In terms of mobility, the Grizzly G5787 is fitted with heavy-duty wheels and leveling feet, which allow users to easily move the saw around the workshop, ensuring flexibility in workspace organization.

The dust collection system integrated into the G5787 is another significant advantage, as it effectively reduces debris and maintains a cleaner working environment. The saw's design promotes efficient air flow that helps in dust management.

Overall, the Grizzly G5787 stands out as a premium choice for woodworkers seeking reliability, precision, and safety. With its powerful motor, durable construction, and thoughtful features, this hybrid table saw is poised to deliver exceptional performance for all woodworking projects.