Figure 29. Remove platen adjustment knob,
indicator plate, and large cap screws.
6.Work the casting off the roller shafts as shown in Figure 30.
Figure 30. Work the casting off the roller shafts.
7.Open the right-hand access door and locate the large nut shown in Figure 31 and remove it with the box wrench included with the machine.
Figure 31. Remove this roller shaft nut located
behind right-hand access door.
8.Slide out the front roller shaft, as shown in Figure 32, to get the V-belts off of the pulley.
Figure 32. Remove roller.
9.Installation is the reverse of removal. If pos- sible, have an assistant help you when installing the V-belts and the roller. Also, an assistant can be helpful on the other end of the roller when tightening the nuts on the roller shafts.
NOTICE
New
|
|
|
|
|
|
|
|
|
|
|
|
G9983 15" | |||
