Grizzly H8192 owner manual Inventory Figures Qty, Hardware not shown Qty

Inventory

The following is a description of the main components shipped with your machine. Lay the components out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Inventory: (Figures 3–4)		Qty
A.	Motor and Base	1
B.	Belt Housing Assembly	1
C.	Belt Table	1

B

A

C

D

F

GE

Figure 3. Model H8192 inventory items A–G.

D.	Sandpaper Disc 8"	1
E.	Aluminum Sanding Disc	1
F.	Disc Table	1
G.	V-Belt Safety Cover	1

H

I

H.	V-Belt Rear Cover	1
I.	Disc Dust Port 2"	1
J.	Table Lock Handles	2
K.	Miter Gauge	1
L.	Hex Wrench 2.5mm	1
M.	Hex Wrench 8mm	1
N.	Disc Dust Cover	1
Hardware (not shown):		Qty
•	Disc Table Scale Pointer	1
•	Cap Screws M10-1.5 x 20	2
•	Phillips Head Screw M6-1 x 15	1
•	Phillips Head Screw M4-.7 x 40	1
•	Phillips Head Screws M4-.7 x 10	6
•	Set Screw M5-.8 x 5	1
•	Flat Washers 10mm	2
•	Flat Washers 4mm	5
•	Lock Washers 10mm	2
•	Wing Nut M4-.7	1

-10-

KJ

N

L

M

Figure 4. Model H8192 inventory items H–N.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

Model H8192 1" Belt/8" Disc Combo Sander