SECTION 4: OPERATIONS
Operation Safety |
| Disc Sanding |
|
|
|
|
|
|
Damage to your eyes and lungs could result from using this machine without proper protective gear. Always wear safety glasses and a respirator when operating this machine.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
and long hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY RECOMMEND that you read books, trade magazines, or get formal training before beginning any projects. Regardless of the content in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
Model H8192 1" Belt/8" Disc Combo Sander
Always keep the workpiece on the left side of the wheel that rotates down toward the table. This will keep the workpiece from flying out of your hands due to kickback.
To use the sanding disc:
1.DISCONNECT THE SANDER FROM POWER!
2.Adjust the angles of the disc sanding table and the miter gauge for your operation.
3.Connect the sander to power, turn it ON, and allow it to reach full speed.
4.Place the workpiece on the table and firmly against the miter gauge.
