C |
D |
E |
Repeat step B on the | Turn over the assembly. | Insert | the | folding |
opposite corner of the | Insert the wire support | trays (10) on either side of | ||
storage rack (8) so that | struts (9) into the legs, | the support | frame (6), | |
it is horizontally stable. | on either side of the | in the notches provided | ||
Finally, fix the other two | support frame (6). | for this purpose (11). | ||
corners of the storage rack (8).
Tighten the four butterfly nuts on the frame (6).
F | G |
6 | 6 |
11 | 11 |
| |
12 | 12 |
10 | 10 |
| To place | the | folding | ||
| trays | (10) | in | the | |
| horizontal | position, | lift | ||
| the tray and latch the | ||||
For each folding tray (10), lock the front hinge by | wire | support strut | (9) | ||
inserting a locking clip (12). Fit it between the two | into the catch provided | ||||
guide grooves provided for this purpose on the | for this purpose. |
| |||
edge of the support frame (6). | Then | lock | the | support | |
| struts (9) by sliding the | ||||
| tabs (13). |
|
|
| |
