Français
English
After use
Set the thermostat to the Min. position.
Unplug the cord from the mains: the pilot light goes
out.
Next, remove the control unit (4) from the appliance
by pressing on the latch (5) to unlock it.
Allow the appliance to cool.
Remove the support legs.
Withdraw the locking strut (14) and clip it to the
cover (1).
Remove the protective cover (1) from the appliance
by opening it to mid-height and then lifting it from the
back of the appliance.
The protective cover (1), the grill plate (2), the drip
tray (3), the folding trays (10) and the service
tray (15) may be cleaned with a cloth, hot water and
washing up liquid.
Never use a metallic sponge or scouring powder as this could
damage the folding trays (10), the service tray (15) or the non-
stick coating inside the protective cover (1) and on the grill
plate (2).
The grill plate (2) may be easily cleaned without any risk
when the control unit (4) is removed from the appliance.
While cleaning the appliance, make sure you do not twist the
pins of the heating element.
Never immerse the appliance, the control unit (4) or the
cord in water.
Largo piedsconfort 01/05 21/1/05 10:29 Page 51