Grundig 400 PE manual Initial Set-Up

INITIAL SET-UP
	When traveling outside of the Americas, use the same procedure
IMPORTANT!
	as above to set the spacing back to 9 kilohertz.
SET-UP FOR NORTH AMERICAN USE
North America’s AM stations are exactly 10 kilohertz apart. At	ADDITIONAL SET-UP INFORMATION
the factory, the radio is set up for the 9 kilohertz spacing of	1. On the right side of the radio, set the SSB switch to the
stations in Europe. To change this to the 190KHZ spacing:
	OFF position. This feature is described on page 23.
1. With the radio OFF, press and release the AM button	NOTE: the FINE TUNING control, on the right side of
	the radio, is only activated and needed when the
once.
	YB400PE is in the SSB mode. You do not need to use
2. Immediately press and release the STEP button. “10	this control when listening to regular AM, FM, and
	shortwave broadcasts.
KHz” now appears in the right side of the display and will
disappear in a few seconds.	On the left side of the radio, set the DX/LOCAL switch to the
This change will be permanently in the radio’s memory as long as	DX position. DX allows for maximum sensitivity, the preferred
	position.
batteries are not taken out for a period of ten minutes or more.

4