Grundig Scenos UMS 6400 DVD manual Repeat functions, Deleting a program

DISC MODE_________________________________________________________________________________

CHAPTER REPEAT ON

TITLE REPEAT ON

REPEAT OFF

Repeat functions

Repeating a chapter, file, title or all chapters, files, or titles on a disc

1During playback, press »REPEAT« on the remote control.

–Display: briefly, for example »CHAPTER REPEAT ON« a chapter, file or title is repeated.

2During playback, press »REPEAT« on the remote control again.

–Display: briefly, for example »TITLE REPEAT ON« all chapters, files or titles are repeated.

3Press »REPEAT« on the remote control a third time to quit the function.

–Display: briefly »REPEAT OFF«.

Notes:

This function is not available in Aux mode.

The PBC function must be switched off in video CD mode.

PROG

P01 T00

PROG

P01 T03

Creating a track memory – playing back tracks in selected order

You can store and then play back up to 99 tracks in a particular order from the inserted disc. A track may be stored more than once. The DVD Micro System must be in the stop position.

This function is not available for DVDs.

1Select this function with »PROGRAM« on the remote control.

–Display on the DVD Micro System: » P01 T00« and » PROG«. » 00« flashes.

2 Select the desired two-digit track number with the numerical buttons

»1 ... 0« (e.g. » 06« or » 12«) and confirm with »DEMO/OK«.

–Display: e.g. » P01 « (memory position) and » 03 « (for the first track).

Note:

To programme further tracks, repeat step 2.

3To start playback of the memory, press »PLAY/PAUSE ￿ II«.

–Playback begins with the first programmed track.

4To end playback of the memory press »STOP 7«.

–This memory is stored.

Deleting a program

The memory is deleted if:

–When the system is stopped »PROGRAM« is held down (on-screen display »PROGRAM OFF«);

–The disc compartment is opened

–The DVD Micro System is switched to standby with »ON/OFF«.

ENGLISH

37