Data Protection Mains and Battery Operation

Power Supply

Data Protection (Mains and Battery Operation)

The data stored in the station memory, the clock time, and the Last Station Memory are retained for approx. 10 minutes. You can calmly exchange the batteries without being afraid of loosing the stored data.

RESET Button

If, due to external interferences (caused by static charges of carpets, thunderstorms, etc.), the control electronics of your Yacht Boy 400 should receive bad information signals, or if no entries at all are pos- sible, press the ¢ RESET button. This is to be found between the

¢AM and the ¢ LOCK button.

For pushing this button, it is best to use a bent-up paper clip.

This releases the RESET impulse which in turn resets the unit to its initial programming state.

The stored data for the individual station memory positions, the clock time and the last station memory is cleared.

When the power supply is interrupted, the stored stations and menu options are retained for approx. 10 minutes.

k12

Page 13

Image 13

Grundig Yacht Boy 400 manual Data Protection Mains and Battery Operation, Reset Button

Contents

Yacht BOY Contents Clearing the Wake-Up Function SSB Mode Amateur Radio Reception InterferencesHints Prescriptions Radio Stations Snoozelight Your Unit at a Glance Display Large numeric block StereoBottom numeric block Front of Unit Key lock Top of Unit Auto Tuning Automatic station tuningTelescopic aerial Snooze Snooze button Left Side of Unit Right Side of UnitRear of Unit Ferrite rod aerial Aerials Battery Operation Power SupplyBattery Check Mains Operation Reset Button Data Protection Mains and Battery Operation General Operation Switching On/Off and LockingDirect Entries Display Illumination Volume Volume and ToneWaveband Selection Tone Frequency Tuning in the FM Band Station TuningFrequency Tuning in the AM Bands If the unit is not yet switched off, do this Adjusting the tuning steps This frequency search is started by pressing the button Station Tuning with the Numeric Buttons Entering a meter band on SW Entering a Meter BandEntry example for the 49-m band Indication of the current band on SW Entering a Meter Band Checking the Reception Frequency What Can You Store?Creating/Overwriting a Memory Position Calling Up Stored Stations Clearing a Memory Position Indicating Free Memory PositionsMemo buttons Clearing the switch-on period prematurely Checking the switch-on timeGoing to Sleep to Music Setting the Clock Time II/Clock Time Setting the Clock TimeClock Clock Time Indication Time I/II Entering a Switch-On Time Automatic Switch-On/Wake-Up FunctionChecking the Entered Switch-On Time Wake-Up with Radio/Automatic Switch-On Select Wake-up with sound signal symbol â in display with Wake-Up with Sound Signal Date ReminderClearing the Wake-Up Function Tuning indication deflects in the rythm of the speech SSB Mode Amateur Radio ReceptionSpecial Functions on AM Interferences Power Supply SpecificationOutput Power Connecting Sockets Intermediate Frequencies Tuning StepsReceivable SW bands Radio Stations Hints PrescriptionsPage 72010 737