Station Tuning
Switch the unit on with the ¢ ON/OFF button.
The display indicates the frequency tuned to – on FM in MHz, and on AM in kHz.
Frequency Tuning in the FM Band
Select the FM band.
You hear the station last tuned to in the FM band.
Manual tuning
Tune to the desired station by briefly pressing one of the buttons 0 TUNING w or TUNING q .
Each button pressure will change the frequency by 50 kHz.
If the 0 TUNING w or TUNING q button is kept pressed, the fre- quency range will be sanned in 50 kHz steps at high speed until the respective button is released.
Automatic tuning (AUTO TUNING)
This frequency search is started by pressing the ¢AUTO TUNING button.
Short presssure: Search is started in direction of higher frequencies.
Long pressure: Search is started in direction of lower frequencies. The search function operates with 50 kHz steps.
The automatic search will stop as soon as it has found a station wor- thy of reception (of a signal strength sufficient for good reception). It then can be restarted with the ¢ AUTO TUNING button (brief or long pressure).
TIME I
I 8:0 0 | LW | 8.9.8.6.0 MHz | |
| FM | ||
| SW | ||
BATT. CHECK | MW | : | kHz |
TUNING
0 . . . 1 . . . 2 . . . 3 . . . 4 . . . 5
Frequency Tuning in the AM Bands
Select the AM range.
You will hear the station last tuned to in the respective AM band.
Selecting an AM band
Press the ¢ AM button repeatedly until the desired AM band is se- lected. This is indicated in the display. Each pressure on the button steps through the AM band in the order
LW / MW / SW / LW / MW / etc.
k15
