Seat

Seat

For transport purposes you can dismount the seat. For that purpose open the quick releases and unscrew the knurled nuts from the axle.

Then remove the quick releases and catch the washers that come out too.To remount the seat, do all the steps in reverse order.

Interchanging the seats

In principle you can interchange the different seat sizes and the seats of the Street Machine Gt with the Speedmachine.

If the adjusting range of 10° cannot fully be used after you have exchanged the seat you will have to slightly reposition the slotted aluminum fittings at the seat.

For that purpose, take off the seat cushion. Undo the self-locking nuts of each of the 4 screws of the upper and lower seat fastening by several turns.The holes in the aluminum fittings are slightly bigger than the diameter of the screws so that you can move the aluminum fittings up or down to find the biggest adjusting range possible.

Finally tighten all screws of the seat fastening by 8-10 Nm.

Screws that are not tight enough may lead to cracking noises while riding and may damage the seat.

48HPVelotechnik